Sunday, 9 September 2018



Electrolysis

In 1800, Sir Humphry Davy, inventor of the miner’s safety lamp, began testing the chemical effects of electricity and found out that decomposition occurred when passing electrical current through substances. This process was later called electrolysis.

He made new discoveries by installing the world’s largest and most powerful electric battery in the vaults of the Royal Institution of London, connecting the battery to charcoal electrodes produced the first electric light.

Voltaic cells use a spontaneous chemical reaction to drive an electric current through an external circuit. These cells are important because they are the basis for the batteries that fuel modern society. But they aren't the only kind of electrochemical cell. It is also possible to construct a cell that does work on a chemical system by driving an electric current through the system. These cells are called electrolytic cells. Electrolysis is used to drive an oxidation-reduction reaction in a direction in which it does not occur spontaneously. Voltaic cells use the energy given off in a spontaneous reaction to do electrical work. Electrolytic cells use electrical work as source of energy to drive the reaction in the opposite direction.
A Galvanic cell converts chemical energy into electrical energy.
Here, the redox reaction is spontaneous and is responsible for the production of electrical energy.
The two half-cells are set up in different containers, being connected through the salt bridge or porous partition.
Here the anode is negative and cathode is the positive electrode. The reaction at the anode is oxidation and that at the cathode is reduction.
An electrolytic cell converts electrical energy into chemical energy.
The redox reaction is not spontaneous and electrical energy has to be supplied to initiate the reaction.
Both the electrodes are placed in a same container in the solution of molten electrolyte.
Here, the anode is positive and cathode is the negative electrode. The reaction at the anode is oxidation and that at the cathode is reduction.
The external battery supplies the electrons. They enter through the cathode and come out through the anode.
Michael Faraday defined the cathode of a cell as the electrode to which cations (positively charged ions, like silver ions Ag+  ) flow within the cell, to be reduced by reacting with electrons (negatively charged) from that electrode.
Likewise he defined the anode as the electrode to which anions (negatively charged ions, like chloride ions Cl−) flow within the cell, to be oxidized by depositing electrons on the electrode.

An electrolytic cell converts electrical energy into chemical energy and not the other way round.
The ensuing redox reaction in the process is not a spontaneous one and for the reaction to start, electric energy has to be introduced in the apparatus.

 

 

Galvanic cell

The Daniell cell, invented in 1836 by British chemist John Frederic Daniell, was the first practical source of electricity, becoming an industry standard and seeing widespread adoption as a power source for electrical telegraph networks. It consisted of a copper pot filled with a copper sulfate solution, in which was immersed an unglazed earthenware container filled with sulfuric acid and a zinc electrode.
In 1866, Georges Leclanché invented a battery that consisted of a zinc anode and a manganese dioxide cathode wrapped in a porous material, dipped in a jar of ammonium chloride solution. The manganese dioxide cathode had a little carbon mixed into it as well, which improved conductivity and absorption. It provided a voltage of 1.4 volts. This cell achieved very quick success in telegraphy, signalling and electric bell work.

Dry Cell

·         The container of the dry cell is made of zinc which also serves as one of the electrodes.
·         The other electrode is a carbon rod in the centre of the cell.
·         The zinc container is lined with a porous paper.
·         A moist mixture of ammonium chloride, man­ganese dioxide, zinc chloride and a porous inert filler occupy the space between the paper lined zinc container and the carbon rod.
·         The cell is sealed with a material like wax.
·         As the cell operates, the zinc is oxidised to Zn2+
·         Anode reaction: Zn → Zn2+ + 2e-   
·         The electrons are utilized at carbon rod (cathode) as the ammonium ions are reduced.
·         Cathode Reaction: 2NH4++2e →2NH3 + H2 
·         The cell reaction is:  Zn+ 2 NH4+ → Zn2+ + 2NH3 + H2
·         Hydrogen is oxidized by MnO2 in the cell:  2MnO2 + H2 →2MnO(OH)
·         Ammonia produced at cathode combines with zinc ions to form complex ion.  Zn2+ + 4NH3 →[Zn(NH3)4]2+ 
·         Ecell is 1.6 volt



The battery History

1800 Voltaic Pile—Alessandro Volta invented the Voltaic Pile and discovered the first practical method of generating electricity. Constructed of alternating discs of zinc and copper with pieces of cardboard soaked in brine between the metals, the Voltaic Pile produced electrical current. The metallic conducting arc was used to carry the electricity over a greater distance. Alessandro Volta's voltaic pile was the first "wet cell battery" that produced a reliable, steady current of electricity.
1836 Daniell Cell—The Voltaic Pile could not deliver an electrical current for a long period of time. Englishman, John F. Daniell invented the Daniell Cell that used two electrolytes: copper sulfate and zinc sulfate. The Daniel Cell lasted longer than the Volta cell or pile. This battery, which produced about 1.1 volts, was used to power objects such as telegraphs, telephones, and doorbells, remained popular in homes for over 100 years
1859 Rechargeable—French inventor, Gaston Plante developed the first practical storage lead-acid battery that could be recharged (secondary battery). This type of battery is primarily used in cars today.
1881—J.A. Thiebaut patented the first battery with both the negative electrode and porous pot placed in a zinc cup.
1881—Carl Gassner invented the first commercially successful dry cell battery (zinc-carbon cell).
1899—Waldmar Jungner invented the first nickel-cadmium rechargeable battery.
1901 Alkaline Storage—Thomas Alva Edison invented the alkaline storage battery. Thomas Edison's alkaline cell had iron as the anode material (-) and nickelic oxide as the cathode material (+)
1949 Alkaline-Manganese Battery—Lew Urry developed the small alkaline battery in 1949. The inventor was working for the Eveready Battery Co. at their research laboratory in Parma, Ohio. Alkaline batteries last five to eight times as long as zinc-carbon cells, their predecessors
Most research activities today revolve around improving lithium-based systems, first commercialized by Sony in 1991. Besides powering cellular phones, laptops, digital cameras, power tools and medical devices, Li-ion is also used for electric vehicles and satellites. The battery has a number of benefits, most notably its high specific energy, simple charging, low maintenance and being environmentally benign.

Friday, 17 August 2018



Quantum chemistry

The quantum theory has many mathematical approaches, but the philosophy is essentially the same. Quantum mechanics is the foundation of chemistry, because it deals with subatomic particles, as well as atoms, molecules, elements, compounds, and much larger systems.
At the sub-atomic scale, there is no boundary between particles and waves. In fact, both particles and wave properties must be considered simultaneously for a system. The study of quantum mechanics lead us to understand the material and the universe beyond the general perception of matter by our ordinary senses of tasting, seeing, hearing, feeling, and sensing.
Furthermore, when coupled with the theory of relativity developed by Einstein, there is no boundary between material and energy. Energy and mass are equivalent, and they can convert into each other.

Modules of Quantum Theory
  • Electromagnetic Radiation
    Transmission of energy through space via no medium is electromagnetic radiation. The visible region of the electromagnetic radiation is light, but that is a very small region. There is much more than light to meet the eye.
  • Spectra
    Diagrams showing the distribution of intensity versus wavelengths are called spectra. Their study reveals the fundamentals of electromagnetic radiation as well as leading to useful applications. For example, the
    Hydrogen Spectra study led Bohr and others to develop the quantum theory to describe the atomic structures. For some cool spectrum demonstration, check out the IR Tutor created by Charles Abrams. Here is one of his animated pictures.
  • Quantum numbers
    The states of electrons are represented by wavefunctions. Each wavefunction has a set of numbers, called quantum numbers. We often use quantum numbers to describe properties of electrons. This page gives a simplistic but important view of quantum numbers.
  • Atomic orbitals
    Electronic states, represented by wavefunctions, in an atom are called atomic orbitals. Since we use quantum numbers to describe them, atomic orbitals are labelled by quantum numbers, such as 2s orbital, s represent quantum number l = 0, that implies m = 0. Each atomic orbital accomodates two electrons due to electron spin.
  • Periodic table
    The beauty of quantum theory is its mathematical results not only explain the arrangement of the elements in the Periodic Table of chemical elements, but they seem rationalize the existence of the elements. Its rationalization lies in the
    Electronic configuration of atoms with more than two electrons. Based on the electronic configurations, Atomic properties are nicely explained.

Thursday, 3 May 2018



Modern Atomic Theory:

Models

       In 1913, Neils Bohr, a student of Rutherford's, developed a new model of the atom. He proposed that electrons are arranged in concentric circular orbits around the nucleus. This model is patterned on the solar system and is known as the planetary model. The Bohr model can be summarized by the following four principles:
  1.  Electrons occupy only certain orbits around the nucleus. Those orbits are stable and are called "stationary" orbits.
2.       Each orbit has an energy associated with it. The orbit nearest the nucleus has an energy of E1, the next orbit E2, etc.
3.       Energy is absorbed when an electron jumps from a lower orbit to a higher one and energy is emitted when an electron falls from a higher orbit to a lower orbit.
4.       The energy and frequency of light emitted or absorbed can be calculated by using the difference between the two orbital energies.


In 1926 Erwin Schrödinger, an Austrian physicist, took the Bohr atom model one step further. Schrödinger used mathematical equations to describe the likelihood of finding an electron in a certain position. This atomic model is known as the quantum mechanical model of the atom. Unlike the Bohr model, the quantum mechanical model does not define the exact path of an electron, but rather, predicts the odds of the location of the electron. This model can be portrayed as a nucleus surrounded by an electron cloud. Where the cloud is most dense, the probability of finding the electron is greatest, and conversely, the electron is less likely to be in a less dense area of the cloud. Thus, this model introduced the concept of sub-energy levels.
Until 1932, the atom was believed to be composed of a positively charged nucleus surrounded by negatively charged electrons. In 1932, James Chadwick bombarded beryllium atoms with alpha particles. An unknown radiation was produced. Chadwick interpreted this radiation as being composed of particles with a neutral electrical charge and the approximate mass of a proton. This particle became known as the neutron. With the discovery of the neutron, an adequate model of the atom became available to chemists.

Since 1932, through continued experimentation, many additional particles have been discovered in the atom. Also, new elements have been created by bombarding existing nuclei with various subatomic particles. The atomic theory has been further enhanced by the concept that protons and neutrons are made of even smaller units called quarks. The quarks themselves are in turn made of vibrating strings of energy. The theory of the composition of the atom continues to be an ongoing and exciting adventure.


Tuesday, 17 April 2018




Uranium Mining, and Processing
Primary Uranium Minerals

Uraninite
UO2.x
Pitchblende
UO2.x (x = 0.2-0.6)
Coffinite
U(SiO4)1-x(OH)4x
Brannerite
(U, CA, Y, CE)(Ti, Fe)2O6
Davidite
(REE)(Y, U)(Ti, Fe3+)20O38
Thucholite
Thorium- and uranium-bearing organic material

Secondary Uranium Minerals

Autunite
Ca(UO2)2(PO4)2·8-12 H2O
Carnotite
K2(UO2)2(VO4)2·1-3 H2O
Gummite
A mixture of uraninite and secondary uranium minerals of variable composition
Seleeite
Mg(UO2)2(PO4)2·10 H2O
Torbernite
Cu(UO2)2(PO4)2·12 H2O
Tyuyamunite
Ca(UO2)2(VO4)2·5-8 H2O
Uranocircite
Ba(UO2)2(PO4)2·8-10 H2O
Uranophane
Ca(UO2)2(HSiO4)2·5 H2O
Zeunerite
Cu(UO2)2(AsO4)2·8-10 H2O

Conventional Agitation Leach
Uranium is highly soluble as a sulfate in sulfuric acid, and as a carbonate in alkaline solution in the U6+ valence state. If it occurs in the U4+ state it must oxidized before becoming soluble; this is a two-step reaction, with a chemical oxidant first used to oxidize iron, for example, from the ferrous Fe2+to the ferric Fe3+ state, and in turn the oxidized iron causes oxidation of the uranium from U4+ to U6+
The first step in the agitated leaching process is to finely grind the ore (typically to about 300- to 500-micron size) in a water–slurry mixture. The ore slurry is thickened to a higher density (about 50 percent solids), and then forwarded to a series of stirred tanks where the leaching takes place. Acid and oxidants are added—for acid leaching, temperatures of 50°C to 60°C are used, whereas alkaline leaching requires a higher temperature of 90°C to 95°C. The tanks can be at normal atmospheric pressure or pressurized. Acid and a suitable oxidant (e.g., oxygen, hydrogen peroxide, sodium chlorate, or manganese dioxide) is added to oxidize U4+ to U6+. The acid is the lixiviant—or liquid solution—that dissolves the metal in the U6+ sulfate form. 
Alternatively, a mixture of sodium carbonate and sodium bicarbonate can be used if the ore gangue has a high acid consumption. The choice of a carbonate or acid leaching route is based on the consumption of each chemical by the ore matrix or host rock, reagent availability, and environmental and economic considerations. The choice of oxidant is based on many of the same considerations as the choice of lixiviant.
In either acid or alkaline leaching, the ore slurry—with the uranium in solution—requires the separation of the solids from the uranium-containing liquid. This is commonly performed using filters (horizontal belt, pressure, or drum filters) or a series of thickeners or decanters. In both cases, the slurry is washed with acidified water for the acid leach process, or water only in the case of the alkaline leach option, in what is termed countercurrent decantation. The washed solids, now referred to as tailings, are generally neutralized with lime or other alkaline material if acid leaching of the ore was employed to extract the uranium. The tailings are then forwarded to a tailings impoundment facility for storage.
The clear liquid containing the uranium in solution is further purified using a solvent extraction or ion exchange technology. After uranium removal, the solution—known as “raffinate” or “barren solution”—is recycled back to the filters or decantation process. The concentrated, purified uranium solution (referred to as “pregnant solution” or “eluate”) is advanced to a precipitation stage using hydrogen peroxide, magnesium oxide, or sodium hydroxide. The resultant uranium precipitate is then filtered or centrifuged, dried or calcined, and packaged into suitable drums for shipping
Uranium Enrichment
Uranium when mined is in the form of a stable oxide (U3O8) or peroxide. After initial purification to remove impurities, which is done by heating strongly and subsequent agglomeration and crushing, the purified uranium oxide is then reduced in a kiln by hydrogen to form uranium dioxide by the following reaction.
U3O8 + 2H2 → 3UO2 + 2H2O
The reduced oxide of uranium is then reacted with hydrogen fluoride to form uranium tetrafluoride which is further reacted with gaseous fluorine to produce uranium hexafluoride which is then used as a starting input material in an enrichment plant. The reactions by which the above mentioned conversion takes place are given below.
UO2 + 4HF → UF4 + 2H2O
UF4 + F2 → UF6
Enrichment Methods
Gaseous diffusion: Uranium hexafluoride is first heated and converted from a solid to a gas. It is then made to pass through a series of semi-permeable membranes which are a part of compressors and converters. Since the U-235 isotope molecules are lighter than the U-238 isotope molecules, they tend to diffuse faster through the pores of the membranes and hence can be separated. The two streams of gas produced have different U-235 concentrations and hence are separated. Several repetitions of this process are required to obtain concentrations of U-235 isotope in the gas are high enough to the extent that it can be used in a nuclear reactor. [3] The enriched UF6 gas is then allowed to liquefy and subsequently solidify before being transported to a nuclear power plant. This technology contributes to about 27% of the world's enriched uranium.
Gas centrifuge: This method of uranium enrichment also utilizes the difference in mass of the uranium isotopes are an aid in their separation. A gas centrifuge system consists of several cylinders which rotate at high speeds that create a strong centrifugal force within. The U-238 molecules being heavier tend to line the outer wall of the cylinder while the lighter U-235 molecules stay more towards the center. The two streams are separated and the depleted stream is pumped back for further U-235 extraction. This method of enrichment proves to be more energy efficient as compared to the diffusion method by a factor of 50:1 and hence is currently used to produce 50% of the world enriched uranium.
Grades of Enriched Uranium
Different grades of uranium can be produced through enrichment which then has different applications. These are broadly classified under the following categories.
Slightly Enriched Uranium (SEU): This has a concentration of 0.9% to 2% of U-235 isotope and is most commonly used as a substitute to natural uranium in heavy water reactors. One benefit of using this instead of natural uranium is that lesser quantity of fuel is required to produce the same amount of energy and as a result, the amount of nuclear waste to manage at the end of the production is significantly reduced.
Low Enriched Uranium (LEU): This has a concentration lower than 20% of U-235 isotope. It is commonly used in light water reactors and research reactors.
Highly Enriched Uranium (HEU): This has a concentration higher than 20% of U-235 isotope. When the concentration is over 80%, it is termed as weapons grade uranium which is necessary for a nuclear chain reaction to occur. Highly Enriched Uranium with concentrations greater than 40% is used in naval reactors in powering submarines and in fast neutron reactors.

Monday, 16 April 2018



Nuclear power reactors

The vast majority of all nuclear power reactors require 'enriched' uranium fuel in which the proportion of the uranium-235 isotope has been raised from the natural level of 0.7% to about 3.5% to 5%.  The enrichment process needs to have the uranium in gaseous form, so on the way from the mine it goes through a conversion plant which turns the uranium oxide into uranium hexafluoride.
About 27 tonnes of fresh fuel is required each year by a 1000 MWe nuclear reactor.

Uranium Oxide.

 The most common forms of uranium oxide are U3O8 and UO2. Both oxide forms are solids that have a low solubility in water and are relatively stable over a wide range of environmental conditions. U3O8 is the most stable form of uranium and is the form found in nature. The most common form of U3O8 is “yellow cake,” a solid named for its characteristic color that is produced during the uranium mining and milling process. UO2 is a solid ceramic material and is the form in which uranium is most commonly used as a nuclear reactor fuel.  At ambient temperatures, UO2 will gradually convert to U3O8.  Uranium oxides are extremely stable in the environment and are thus generally considered the preferred chemical form for storage or disposal.

 Isotope Separation

 Natural uranium is a mixture of 0.711% 235U and 92.89% of 238U. The enrichment process enriches the 235U content in natural uranium to the desired percentage. Low-enriched uranium which is typically used in nuclear reactors has 3-4% percent of 235U, while the highly enriched uranium has more than 50% of 235U and is typically used in nuclear weapons.
 Uranium is made from uraninite, which is a mixture of UO2, UO3, oxides of lead, thorium and rare earth elements. Uraninite is calcined to evaporate some impurities, then agglomerated and crushed. U3O8 is then put in a kiln with hydrogen:
 U3O8 + 2H2 =⇒ 3UO2 + 2H2O,                  Heat = −109kJ/mole       (1)
UO3 + H2 =⇒ UO2 + H2O                              Heat = −109kJ/mole       (2)
 The uranium dioxide is then treated with hydrogen fluoride in another kiln.
 UO2 + 4HF =⇒ UF4 + 2H2O,                        Heat = −176kJ/mole       (3)
 Finally the tetrafluoride is fed into a fluidized bed reactor with fluorine to produce the uranium hexafluoride (238UF6, 235 UF6) that is used in the separation process.
 UF4 + F2 =⇒ UF6                                                                                             (4)
 After the separation of molecules the UF6 is vaporized in autoclaves with steam and reacted with hydrogen at 700°C:
UF6 + 2H2O + H2 =⇒ U3O8 + 6HF                                                              (5)
 The final product is the so-called yellow cake, which is the basic raw material for nuclear fuel fabrication.
 Uranium hexafluoride is used because it has great storage properties. It can be used as a solid, liquid or gas, with minimum variations in pressure or temperature. It is usually stored as a solid, when in use it can be turned into liquid which is ideal for pumping. For the actual separation process it is used as a gas.

Uranium Hexafluoride.

 UF6  is the chemical form of uranium that is used during the uranium enrichment process. Within a reasonable range of temperature and pressure, it can be a solid, liquid, or gas. Solid UF6 is a white, dense, crystalline material that resembles rock salt.  UF6 does not react with oxygen, nitrogen, carbon dioxide, or dry air, but it does react with water or water vapor (including humidity in the air). When UF6 comes into contact with water, such as water vapor in the air, the UF6 and water react, forming corrosive hydrogen fluoride (HF) and a uranium-fluoride compound called uranyl fluoride (UO2F2). For this reason, UF6 is always handled in leak-tight containers and processing equipment. Although very convenient for processing, UF6 is not considered a preferred form for long-term storage or disposal because of its relative instability.
Enrichment processes require uranium to be in a gaseous form at relatively low temperature, hence uranium oxide from the mine is converted to uranium hexafluoride in a preliminary process, at a separate conversion plant.
Enriched UF6 is transported to a fuel fabrication plant where it is converted to uranium dioxide powder. This powder is then pressed to form small fuel pellets, which are then heated to make a hard ceramic material. The pellets are then inserted into thin tubes to form fuel rods. These fuel rods are then grouped together to form fuel assemblies, which are several meters long. 
The number of fuel rods used to make each fuel assembly depends on the type of reactor. A pressurized water reactor may use between 121-193 fuel assemblies, each consisting of between 179-264 fuel rods.
There are currently two generic commercial methods employed internationally for enrichment: gaseous diffusion (referred to as first generation) and gas centrifuge (second generation), which consumes only 2% to 2.5%[9] as much energy as gaseous diffusion, with centrifuges being at least a "factor of 20" more efficient.
The gas centrifuge process uses a large number of rotating cylinders in series and parallel formations. Each cylinder's rotation creates a strong centripetal force so that the heavier gas molecules containing 238U move tangentially toward the outside of the cylinder and the lighter gas molecules rich in 235U collect closer to the center.
Today, 5% U-235 is the maximum level of enrichment for fuel used in normal power reactors. 

Uranium Metal.

 Uranium metal is heavy, silvery white, malleable, ductile, and softer than steel. It is one of the densest materials known (19 g/cm3), being 1.6 times more dense than lead. Uranium metal is not as stable as U3O8 or UO2 because it is subject to surface oxidation. It tarnishes in air, with the oxide film preventing further oxidation of bulk metal at room temperature. Water attacks uranium metal slowly at room temperature and rapidly at higher temperatures. Uranium metal powder or chips will ignite spontaneously in air at ambient temperature.

Monday, 12 February 2018



History of Cell Biology


During the 17th Century
· 1665 Robert Hooke had successfully invented the microscope. Because of this discovery, Robert Hooke was the first one to have a close look of a cell appears to be. His description of these cells was published in Micrographia. However, the cell walls observed by Hooke gave no indication of the nucleus and other organelles found in most living cells.

· 1674  A live cell was observed by Anton van Leeuwenhoek, the very first successful effort to do such.

 
During the 18th Century

· There were not much discovery in the field of Cell Biology during this time. It took another hundred years after those first cell observations for the ubiquitous nature of cells to be fully recognized.
During the 19th Century
·1825 French scientist Francoise Raspail established one of the concepts of cell theory: that all cells arise from pre-existing cells. The basis of this was the witnessing of binary fission under a microscope wherein a single cell divided into two daughter cells.
·1836 Theodore Schwann and Matthias Scleiden proposed the cell theory in 1836. The concept of the theory holds that: (1) The cell is the unit of structure, physiology, and organization in living things, (2) The cell retains a dual existence as a distinct entity and a building block in the construction of organisms, (3) Cells form by free-cell formation, similar to the formation of crystals (spontaneous generation).
·1855 The third doctrine of Schwann and Scleiden was proven wrong by Rudolf Virchow. In this year, he formally enunciated in his powerful dictum that, “Omnis cellula e cellula“, which is translated as “All cells only arise from pre-existing cells“.
· In the middle of the 19th century, Scientists had accepted the fact that it was simply not possible to view cell structures which measure less than a half of a micrometer with the use of a microscope. But because of the development of the cathode ray tube, they’ve later discovered that aside from using light, electrons can be used to view these structures.
20th Century up to the present
·        1919 Phoebus Levene, a Russian physician and chemist, first discovered the order of the three major components of a single nucleotide (phosphate, pentose sugar, and nitrogenous base). He was also the first to discover the carbohydrate component of RNA (ribose), and carbohydrate component of DNA (deoxyribose). Years later, Levene finally identified how DNA and RNA molecules are put together

·1933 The first prototype of the electron microscope was constructed. It is a type of microscope which utilizes a beam of electrons to create an image of the specimen.

·1943 A scientist named Erwin Chargaff began to challenge Levene’s previous conclusions. In 1950, he noted that the nucleotide composition of DNAdiffers among species and do not repeat in the same order reached two major conclusions.

· Chargaff concluded that almost all DNA, no matter what organism or tissue type it comes from, still maintains certain properties, even as its composition varies. He postulated the “Chargaff’s Rule” which says that the amount of cytosine is equal to the amount of guanine, and the amount of thymine is equal to the amount of adenine. In short, the total amount of pyrimidines (thymine and cytosine) approximates the amount of purines (adenine and guanine).
·1951 Meanwhile in the field of cytology, George Grey has successfully made the first continuous cell line to be cultured. The cell line was derived from the cervical cancer cells of Henrietta Lacks, thus these cells were referred to as HeLa cells. These cells played a significant role in the course of cell biology.
·1953 James Watson and Francis Crick derived the three-dimensional and double helical model of the DNA (Pray 2009). After that, the process of replicating the DNA was discovered.
·1961 The endeavor of cracking the genetic code started.
As with the rapid growth of molecular biology in the mid-20th century, cell biology research exploded. It became possible to maintain, grow, and manipulate cells outside of living organisms. The minimal media requirements for cells were characterized years later. Sterile cell culture techniques were further developed.
·  Further advances in electron microscopy greatly facilitated the development of transfection methods. The process of genetic engineering, or the act of modifying an organism’s genetic material either by adding genes or deleting some parts of it, was declared as a separate field in the 1970s.
·1970 Reverse transcriptase in retroviruses was first discovered.
·1977 Frederick Sanger introduced the process of DNA sequencing. The first ever organism to have its genome sequence is a bacteriophage.
·1980 The Polymerase Chain Reaction, a method used to amplify a copy of a segment of a DNA was inverted by Kary Mullis .
1998 Hamilton and Baulcombe discovered the siRNA as part of post-transcriptional gene silencing in plants.